Rule Electronic Sensing Automatic Bilge Pumps deliver dependable performance with a "smart" design.
These pumps boast "smart" operation, with an internal computer chip that cycles them on every 2 1/2 minutes, then quickly shuts them down if no water is detected. Capacity is rated at an honest 12V rather than 13.6V, which means that you get the capacity you are paying for in real-world pumping situations. Convenient features include bases that detach to make clearing debris easy and screw-on ports that ease installation. Pumps are completely submersible, rustproof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light.
KEY FEATURES
Impellers optimized to provide greater flow at the same amperage
Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
Backflow prevention reduces the amount of water left over in the bilge
Hidden air vents in the body help prevent airlocks
Threaded discharge for easier installation and maintenance
Internal computer chip cycles pump on and shuts pump off if no water detected
Built-in strainer bases snap off to make cleaning easy
Completely submersible, rustproof, corrosion-proof and ignition-protected
Three-way wiring enables connection to a switch for manual override or indicator light
Rated flow is at 12V vs. 13.6V
SPECIFICATIONS
Amperage: 3.4
Capacity: 800 Gallons per Hour
Diameter: 3/4"
Voltage: 12-Volts
Automatic
Warranty Details: Three Year Limited Warranty; Contact Manufacturer For Details
Rule Manual and Automatic Bilge Pumps: 1100GPH, Automatic
Rule Electronic Sensing Automatic Bilge Pumps deliver dependable performance with a "smart" design.
These pumps boast "smart" operation, with an internal computer chip that cycles them on every 2 1/2 minutes, then quickly shuts them down if no water is detected. Capacity is rated at an honest 12V rather than 13.6V, which means that you get the capacity you are paying for in real-world pumping situations. Convenient features include bases that detach to make clearing debris easy and screw-on ports that ease installation. Pumps are completely submersible, rustproof, corrosion-proof and ignition-protected. Three-way wiring enables connection to a switch for manual override or indicator light.
KEY FEATURES
Impellers optimized to provide greater flow at the same amperage
Built-in Thermal Cut-Off (TCO) provides added protection for pump and vessel
Back flow prevention reduces the amount of water leftover in the bilge
Hidden air vents in the body help prevent airlocks
Threaded discharge for easier installation and maintenance
Internal computer chip cycles pump on and shuts pump off if no water detected
Built-in strainer bases snap off to make cleaning easy
Completely submersible, rustproof, corrosion-proof and ignition-protected
Three-way wiring enables connection to a switch for manual override or indicator light
Rated flow is at 12V vs. 13.6V
SPECIFICATIONS
Amperage: 3.7
Capacity: 1100 Gallons per Hour
Diameter: 1/8"
Voltage: 12-Volts
Automatic
Warranty Details: Three Year Limited Warranty; Contact Manufacturer For Details
Rule bilge pumps deliver dependable service in the marine environment
Rule submersible bilge pumps, such as the non-automatic 1500gph model you see here are universally recognized for their dependable performance. Outstanding features include submersible motors with non-corroding stainless steel shafts, water cooling and vibration-free centrifugal impellers with short-term run-dry capability. Pumps can easily be unsnapped from their strainer base for removal of debris.
In order for this pump to operate, it must be wired to a float switch or a water sensing switch. For remote operation, it can also be wired to a bilge pump panel switch. We offer a wide selection of bilge pump and panel switches.
The outlet port of this pump fits 1 1/8"ID hose. If your hose needs replacement, or for a new installation, check our selection of bilge pump hose and hose clamps.
CAPACITY (Varies with lift or “head”)
Open flow output @ 0m (0'): 1500gph
Open flow output @ 1m (3.35'): 1200gph
Open flow output @ 2m (6.7'): 680gph
KEY FEATURES
Compact, efficient, long-life motor
Can run dry for short periods
Easy-to-clean, snap-lock strainer base
Non-corroding stainless steel shaft
Completely submersible
Marine-grade blocked wiring
Rust and corrosion protection
Nearly silent, vibrationless operation
Traditional operation activated by a float switch and/or panel switch (both sold separately), provides an extra level of security and protection
Rule Industries' Non-Automatic Submersible Electric Bilge Pump offers great performance at a value price. Suitable for use on commercial and recreational vessels, this submersible pump features a motor with a stainless-steel shaft, water cooling and a vibration-free centrifugal impellers that won't burn out if run dry. The strainer base allows the tool-less removal of the pump body for cleaning. Installation requires a panel switch for manual operation or a float switch for automatic operation.
